dmesg - Updated nVidia
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.19.0-32-generic (buildd@lgw01-57) (gcc version 4.9.2 (Ubuntu 4.9.2-10ubuntu13) ) #37-Ubuntu SMP Wed Oct 21 10:23:06 UTC 2015 (Ubuntu 3.19.0-32.37-generic 3.19.8-ckt7)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
BIOS-e820: [mem 0x0000000000059000-0x000000000009bfff] usable
BIOS-e820: [mem 0x000000000009c000-0x000000000009cfff] reserved
BIOS-e820: [mem 0x000000000009d000-0x000000000009dfff] usable
BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000009bd02fff] usable
BIOS-e820: [mem 0x000000009bd03000-0x000000009cbfefff] reserved
BIOS-e820: [mem 0x000000009cbff000-0x000000009cd7efff] ACPI NVS
BIOS-e820: [mem 0x000000009cd7f000-0x000000009cdfefff] ACPI data
BIOS-e820: [mem 0x000000009cdff000-0x000000009cdfffff] usable
BIOS-e820: [mem 0x00000000f80f8000-0x00000000f80f8fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000025dffffff] usable
NX (Execute Disable) protection: active
e820: update [mem 0x92f83018-0x92f93057] usable ==> usable
e820: update [mem 0x9177f018-0x9178f657] usable ==> usable
extended physical RAM map:
reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
reserve setup_data: [mem 0x0000000000059000-0x000000000009bfff] usable
reserve setup_data: [mem 0x000000000009c000-0x000000000009cfff] reserved
reserve setup_data: [mem 0x000000000009d000-0x000000000009dfff] usable
reserve setup_data: [mem 0x000000000009e000-0x000000000009ffff] reserved
reserve setup_data: [mem 0x0000000000100000-0x000000009177f017] usable
reserve setup_data: [mem 0x000000009177f018-0x000000009178f657] usable
reserve setup_data: [mem 0x000000009178f658-0x0000000092f83017] usable
reserve setup_data: [mem 0x0000000092f83018-0x0000000092f93057] usable
reserve setup_data: [mem 0x0000000092f93058-0x000000009bd02fff] usable
reserve setup_data: [mem 0x000000009bd03000-0x000000009cbfefff] reserved
reserve setup_data: [mem 0x000000009cbff000-0x000000009cd7efff] ACPI NVS
reserve setup_data: [mem 0x000000009cd7f000-0x000000009cdfefff] ACPI data
reserve setup_data: [mem 0x000000009cdff000-0x000000009cdfffff] usable
reserve setup_data: [mem 0x00000000f80f8000-0x00000000f80f8fff] reserved
reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
reserve setup_data: [mem 0x0000000100000000-0x000000025dffffff] usable
efi: EFI v2.31 by Lenovo
efi: ACPI=0x9cdfe000 ACPI 2.0=0x9cdfe014 SMBIOS=0x9cbfe000 ESRT=0x9c08f000
esrt: Reserving ESRT space from 0x000000009c08f000 to 0x000000009c08f060.
SMBIOS 2.7 present.
DMI: LENOVO 20BXCTO1WW/20BXCTO1WW, BIOS JBET53WW (1.18 ) 09/14/2015
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x25e000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 00C0000000 mask 7FC0000000 uncachable
1 base 00A0000000 mask 7FE0000000 uncachable
2 base 009E000000 mask 7FFE000000 uncachable
3 base 009D000000 mask 7FFF000000 uncachable
4 base 009CE00000 mask 7FFFE00000 uncachable
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
e820: last_pfn = 0x9ce00 max_arch_pfn = 0x400000000
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000096000] 96000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fe5000, 0x01fe5fff] PGTABLE
BRK [0x01fe6000, 0x01fe6fff] PGTABLE
BRK [0x01fe7000, 0x01fe7fff] PGTABLE
init_memory_mapping: [mem 0x25de00000-0x25dffffff]
[mem 0x25de00000-0x25dffffff] page 2M
BRK [0x01fe8000, 0x01fe8fff] PGTABLE
init_memory_mapping: [mem 0x240000000-0x25ddfffff]
[mem 0x240000000-0x25ddfffff] page 2M
init_memory_mapping: [mem 0x220000000-0x23fffffff]
[mem 0x220000000-0x23fffffff] page 1G
init_memory_mapping: [mem 0x00100000-0x9bd02fff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
[mem 0x40000000-0x7fffffff] page 1G
[mem 0x80000000-0x9bbfffff] page 2M
[mem 0x9bc00000-0x9bd02fff] page 4k
init_memory_mapping: [mem 0x9cdff000-0x9cdfffff]
[mem 0x9cdff000-0x9cdfffff] page 4k
BRK [0x01fe9000, 0x01fe9fff] PGTABLE
init_memory_mapping: [mem 0x100000000-0x21fffffff]
[mem 0x100000000-0x21fffffff] page 1G
RAMDISK: [mem 0x3e36e000-0x3fffafff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x000000009CDFE014 000024 (v02 LENOVO)
ACPI: XSDT 0x000000009CDFE1C0 0000FC (v01 LENOVO TP-JB 00001180 PTEC 00000002)
ACPI: FACP 0x000000009CDF8000 00010C (v05 LENOVO TP-JB 00001180 PTEC 00000002)
ACPI: DSDT 0x000000009CDE3000 010F65 (v01 LENOVO TP-JB 00001180 INTL 20120711)
ACPI: FACS 0x000000009CD68000 000040
ACPI: SLIC 0x000000009CDFD000 000176 (v01 LENOVO TP-JB 00001180 PTEC 00000001)
ACPI: ASF! 0x000000009CDFC000 0000A5 (v32 LENOVO TP-JB 00001180 PTEC 00000002)
ACPI: HPET 0x000000009CDFB000 000038 (v01 LENOVO TP-JB 00001180 PTEC 00000002)
ACPI: ECDT 0x000000009CDFA000 000052 (v01 LENOVO TP-JB 00001180 PTEC 00000002)
ACPI: APIC 0x000000009CDF7000 000098 (v01 LENOVO TP-JB 00001180 PTEC 00000002)
ACPI: MCFG 0x000000009CDF6000 00003C (v01 LENOVO TP-JB 00001180 PTEC 00000002)
ACPI: SSDT 0x000000009CDF5000 000033 (v01 LENOVO TP-SSDT1 00000100 INTL 20120711)
ACPI: SSDT 0x000000009CDF4000 000486 (v01 LENOVO TP-SSDT2 00000200 INTL 20120711)
ACPI: SSDT 0x000000009CDE2000 0009CB (v01 LENOVO SataAhci 00001000 INTL 20120711)
ACPI: SSDT 0x000000009CDE1000 000152 (v01 LENOVO Rmv_Batt 00001000 INTL 20120711)
ACPI: SSDT 0x000000009CDE0000 0006C9 (v01 LENOVO Cpu0Ist 00003000 INTL 20120711)
ACPI: SSDT 0x000000009CDDF000 000B74 (v02 LENOVO CpuSsdt 00003000 INTL 20120711)
ACPI: SSDT 0x000000009CDDE000 000369 (v02 LENOVO CtdpB 00001000 INTL 20120711)
ACPI: SSDT 0x000000009CDDC000 001475 (v01 LENOVO SaSsdt 00003000 INTL 20120711)
ACPI: SSDT 0x000000009CDDB000 000394 (v02 LENOVO CppcTabl 00001000 INTL 20120711)
ACPI: PCCT 0x000000009CDDA000 00006E (v05 LENOVO TP-JB 00001180 PTEC 00000002)
ACPI: SSDT 0x000000009CDD9000 000AC4 (v02 LENOVO Cpc_Tabl 00001000 INTL 20120711)
ACPI: TCPA 0x000000009CDD8000 000032 (v02 PTL LENOVO 06040000 LNVO 00000001)
ACPI: SSDT 0x000000009CDD7000 0006A3 (v01 Intel_ TpmTable 00001000 INTL 20120711)
ACPI: UEFI 0x000000009CDD6000 000042 (v01 LENOVO TP-JB 00001180 PTEC 00000002)
ACPI: MSDM 0x000000009CCB2000 000055 (v03 LENOVO TP-JB 00001180 PTEC 00000002)
ACPI: BATB 0x000000009CDD5000 000046 (v01 LENOVO TP-JB 00001180 PTEC 00000002)
ACPI: FPDT 0x000000009CDD4000 000064 (v01 LENOVO TP-JB 00001180 PTEC 00000002)
ACPI: UEFI 0x000000009CDD3000 0002E2 (v01 LENOVO TP-JB 00001180 PTEC 00000002)
ACPI: BGRT 0x000000009CDD2000 000038 (v01 LENOVO TP-JB 00001180 PTEC 00000002)
ACPI: DMAR 0x000000009CDD1000 0000B0 (v01 LENOVO TP-JB 00001180 PTEC 00000002)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000025dffffff]
NODE_DATA(0) allocated [mem 0x25dff9000-0x25dffdfff]
[ffffea0000000000-ffffea00097fffff] PMD -> [ffff880255600000-ffff88025d5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x25dffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x00057fff]
node 0: [mem 0x00059000-0x0009bfff]
node 0: [mem 0x0009d000-0x0009dfff]
node 0: [mem 0x00100000-0x9bd02fff]
node 0: [mem 0x9cdff000-0x9cdfffff]
node 0: [mem 0x100000000-0x25dffffff]
Initmem setup node 0 [mem 0x00001000-0x25dffffff]
On node 0 totalpages: 2071711
DMA zone: 64 pages used for memmap
DMA zone: 22 pages reserved
DMA zone: 3995 pages, LIFO batch:0
DMA32 zone: 9909 pages used for memmap
DMA32 zone: 634116 pages, LIFO batch:31
Normal zone: 22400 pages used for memmap
Normal zone: 1433600 pages, LIFO batch:31
tboot: non-0 tboot_addr but it is not of type E820_RESERVED
Reserving Intel graphics stolen memory at 0x9e000000-0x9fffffff
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
smpboot: Allowing 8 CPUs, 4 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
PM: Registered nosave memory: [mem 0x0009c000-0x0009cfff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x9177f000-0x9177ffff]
PM: Registered nosave memory: [mem 0x9178f000-0x9178ffff]
PM: Registered nosave memory: [mem 0x92f83000-0x92f83fff]
PM: Registered nosave memory: [mem 0x92f93000-0x92f93fff]
PM: Registered nosave memory: [mem 0x9bd03000-0x9cbfefff]
PM: Registered nosave memory: [mem 0x9cbff000-0x9cd7efff]
PM: Registered nosave memory: [mem 0x9cd7f000-0x9cdfefff]
PM: Registered nosave memory: [mem 0x9ce00000-0x9dffffff]
PM: Registered nosave memory: [mem 0x9e000000-0x9fffffff]
PM: Registered nosave memory: [mem 0xa0000000-0xf80f7fff]
PM: Registered nosave memory: [mem 0xf80f8000-0xf80f8fff]
PM: Registered nosave memory: [mem 0xf80f9000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xffffffff]
e820: [mem 0xa0000000-0xf80f7fff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 31 pages/cpu @ffff88025dc00000 s87104 r8192 d31680 u262144
pcpu-alloc: s87104 r8192 d31680 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 2039316
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
AGP: Checking aperture...
AGP: No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 7956740K/8286844K available (8005K kernel code, 1234K rwdata, 3764K rodata, 1408K init, 1300K bss, 330104K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
NR_IRQS:16640 nr_irqs:760 16
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-7.
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2593.840 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5187.68 BogoMIPS (lpj=10375360)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20141107
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 7 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Freeing SMP alternatives memory: 32K (ffffffff81e96000 - ffffffff81e9e000)
ftrace: allocating 30118 entries in 118 pages
dmar: Host address width 39
dmar: DRHD base: 0x000000fed90000 flags: 0x0
dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e1ff0505e
dmar: DRHD base: 0x000000fed91000 flags: 0x1
dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da
dmar: RMRR base: 0x0000009c956000 end: 0x0000009c96cfff
dmar: RMRR base: 0x0000009d800000 end: 0x0000009fffffff
IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
HPET id 0 under DRHD base 0xfed91000
Queued invalidation will be enabled to support x2apic and Intr-remapping.
Your BIOS is broken and requested that x2apic be disabled.
This will slightly decrease performance.
Use 'intremap=no_x2apic_optout' to override BIOS request.
Enabled IRQ remapping in xapic mode
x2apic not enabled, IRQ remapping is in xapic mode
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i7-5600U CPU @ 2.60GHz (fam: 06, model: 3d, stepping: 04)
TSC deadline timer enabled
Performance Events: PEBS fmt2+, generic architected perfmon, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
.... node #0, CPUs: #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (20750.72 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0x9cbff000-0x9cd7efff] (1572864 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 18:29:08, date: 10/26/15
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI : EC: EC description table is found, configuring boot EC
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880253D88800 000436 (v01 PmRef Cpu0Cst 00003001 INTL 20120711)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880253D89000 0005AA (v01 PmRef ApIst 00003000 INTL 20120711)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880253844000 000119 (v02 PmRef ApCst 00003000 INTL 20120711)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20141107/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [PUBS] (on)
acpi PNP0C0A:01: ACPI dock station (docks/bays count: 1)
ACPI: Power Resource [NVP3] (on)
ACPI: Power Resource [NVP2] (on)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability]
acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3f]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xa0000000-0xfebfffff]
pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff]
pci 0000:00:00.0: [8086:1604] type 00 class 0x060000
pci 0000:00:02.0: [8086:1616] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xf2000000-0xf2ffffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xdfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f]
pci 0000:00:03.0: [8086:160c] type 00 class 0x040300
pci 0000:00:03.0: reg 0x10: [mem 0xf4230000-0xf4233fff 64bit]
pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xf4220000-0xf422ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xf4239000-0xf423901f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: [8086:15a2] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xf4200000-0xf421ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xf423e000-0xf423efff]
pci 0000:00:19.0: reg 0x18: [io 0x4080-0x409f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:9ca0] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf4234000-0xf4237fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:9c9a] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:9c94] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:9c98] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:9ca6] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf423d000-0xf423d3ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:9cc3] type 00 class 0x060100
pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0x40a8-0x40af]
pci 0000:00:1f.2: reg 0x14: [io 0x40bc-0x40bf]
pci 0000:00:1f.2: reg 0x18: [io 0x40a0-0x40a7]
pci 0000:00:1f.2: reg 0x1c: [io 0x40b8-0x40bb]
pci 0000:00:1f.2: reg 0x20: [io 0x4060-0x407f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf423c000-0xf423c7ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf4238000-0xf42380ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf]
pci 0000:00:1f.6: [8086:9ca4] type 00 class 0x118000
pci 0000:00:1f.6: reg 0x10: [mem 0xf423b000-0xf423bfff 64bit]
pci 0000:02:00.0: [10ec:5227] type 00 class 0xff0000
pci 0000:02:00.0: reg 0x10: [mem 0xf4100000-0xf4100fff]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [mem 0xf4100000-0xf41fffff]
pci 0000:03:00.0: [8086:095b] type 00 class 0x028000
pci 0000:03:00.0: reg 0x10: [mem 0xf4000000-0xf4001fff 64bit]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [mem 0xf4000000-0xf40fffff]
pci 0000:04:00.0: [10de:1347] type 00 class 0x030200
pci 0000:04:00.0: reg 0x10: [mem 0xf3000000-0xf3ffffff]
pci 0000:04:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:04:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
pci 0000:04:00.0: reg 0x24: [io 0x3000-0x307f]
pci 0000:04:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
pci 0000:00:1c.4: PCI bridge to [bus 04]
pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.4: bridge window [mem 0xf3000000-0xf3ffffff]
pci 0000:00:1c.4: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
ACPI: Enabled 4 GPEs in block 00 to 7F
ACPI : EC: GPE = 0x25, I/O: command/status = 0x66, data = 0x62
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=mem,locks=none
vgaarb: loaded
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
e820: reserve RAM buffer [mem 0x0009c000-0x0009ffff]
e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
e820: reserve RAM buffer [mem 0x9177f018-0x93ffffff]
e820: reserve RAM buffer [mem 0x92f83018-0x93ffffff]
e820: reserve RAM buffer [mem 0x9bd03000-0x9bffffff]
e820: reserve RAM buffer [mem 0x9ce00000-0x9fffffff]
e820: reserve RAM buffer [mem 0x25e000000-0x25fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:00: [mem 0x000e0000-0x000e3fff] has been reserved
system 00:00: [mem 0x000e4000-0x000e7fff] has been reserved
system 00:00: [mem 0x000e8000-0x000ebfff] has been reserved
system 00:00: [mem 0x000ec000-0x000effff] has been reserved
system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
system 00:00: [mem 0x00100000-0x9fffffff] could not be reserved
system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x1800-0x189f] could not be reserved
system 00:01: [io 0x0800-0x087f] has been reserved
system 00:01: [io 0x0880-0x08ff] has been reserved
system 00:01: [io 0x0900-0x097f] has been reserved
system 00:01: [io 0x0980-0x09ff] has been reserved
system 00:01: [io 0x0a00-0x0a7f] has been reserved
system 00:01: [io 0x0a80-0x0aff] has been reserved
system 00:01: [io 0x0b00-0x0b7f] has been reserved
system 00:01: [io 0x0b80-0x0bff] has been reserved
system 00:01: [io 0x15e0-0x15ef] has been reserved
system 00:01: [io 0x1600-0x167f] has been reserved
system 00:01: [io 0x1640-0x165f] has been reserved
system 00:01: [mem 0xf8000000-0xfbffffff] could not be reserved
system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:03: Plug and Play ACPI device, IDs LEN0071 PNP0303 (active)
pnp 00:04: Plug and Play ACPI device, IDs LEN200f PNP0f13 (active)
pnp 00:05: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active)
system 00:06: [mem 0xa0010000-0xa001ffff] has been reserved
system 00:06: [mem 0xa0000000-0xa000ffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 7 devices
pci 0000:04:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [mem 0xf4100000-0xf41fffff]
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [mem 0xf4000000-0xf40fffff]
pci 0000:04:00.0: BAR 6: no space for [mem size 0x00080000 pref]
pci 0000:04:00.0: BAR 6: failed to assign [mem size 0x00080000 pref]
pci 0000:00:1c.4: PCI bridge to [bus 04]
pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.4: bridge window [mem 0xf3000000-0xf3ffffff]
pci 0000:00:1c.4: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 15 [mem 0xa0000000-0xfebfffff]
pci_bus 0000:00: resource 16 [mem 0xfed40000-0xfed4bfff]
pci_bus 0000:02: resource 1 [mem 0xf4100000-0xf41fffff]
pci_bus 0000:03: resource 1 [mem 0xf4000000-0xf40fffff]
pci_bus 0000:04: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:04: resource 1 [mem 0xf3000000-0xf3ffffff]
pci_bus 0000:04: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 29236K (ffff88003e36e000 - ffff88003fffb000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x8bf82000-0x8ff82000] (64MB) mapped at [ffff88008bf82000-ffff88008ff81fff]
RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
microcode: CPU0 sig=0x306d4, pf=0x40, revision=0x21
microcode: CPU1 sig=0x306d4, pf=0x40, revision=0x21
microcode: CPU2 sig=0x306d4, pf=0x40, revision=0x21
microcode: CPU3 sig=0x306d4, pf=0x40, revision=0x21
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
futex hash table entries: 2048 (order: 5, 131072 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1445884147.636:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.5.2
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
efifb: probing for efifb
efifb: framebuffer at 0xc0000000, mapped to 0xffffc90004f00000, using 8100k, total 8100k
efifb: mode is 1920x1080x32, linelength=7680, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 240x67
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x11142120
intel_idle: v0.4 model 0x3D
intel_idle: lapic_timer_reliable_states 0xffffffff
ACPI: AC Adapter [AC] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THM0] (48 C)
GHES: HEST is not enabled!
Linux agpgart interface v0.103
tpm_tis 00:05: 1.2 TPM (device-id 0x0, rev-id 78)
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Battery Slot [BAT1] (battery present)
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 3.19.0-32-generic xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 11 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 3.19.0-32-generic xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf423d000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 3.19.0-32-generic ehci_hcd
usb usb3: SerialNumber: 0000:00:1d.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: [email protected]
Intel P-state driver initializing.
Consider also installing thermald for improved thermal control.
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
Error parsing PCC subspaces from PCCT
ACPI PCC probe failed.
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 9e73060ac5f547557e1df7a4c8c2dfb59de227f8'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
evm: HMAC attrs: 0x1
Magic number: 3:814:494
rtc_cmos 00:02: setting system clock to 2015-10-26 18:29:08 UTC (1445884148)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1408K (ffffffff81d36000 - ffffffff81e96000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 176K (ffff8800017d4000 - ffff880001800000)
Freeing unused kernel memory: 332K (ffff880001bad000 - ffff880001c00000)
random: systemd-udevd urandom read with 19 bits of entropy available
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
rtsx_pci 0000:02:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 43
ahci 0000:00:1f.2: version 3.0
e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 3 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
ata1: SATA max UDMA/133 abar m2048@0xf423c000 port 0xf423c100 irq 44
ata2: SATA max UDMA/133 abar m2048@0xf423c000 port 0xf423c180 irq 44
ata3: DUMMY
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
usb 1-6: new full-speed USB device number 2 using xhci_hcd
usb 3-1: new high-speed USB device number 2 using ehci-pci
e1000e 0000:00:19.0 eth0: registered PHC clock
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 68:f7:28:fa:bb:aa
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: 1000FF-0FF
usb 1-6: New USB device found, idVendor=138a, idProduct=0017
usb 1-6: New USB device strings: Mfr=0, Product=0, SerialNumber=1
usb 1-6: SerialNumber: 55a6918362cb
usb 3-1: New USB device found, idVendor=8087, idProduct=8001
usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-1:1.0: USB hub found
hub 3-1:1.0: 8 ports detected
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata2.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
ata2.00: ATA-9: SanDisk SSD U110 16GB, U21B001, max UDMA/133
ata2.00: 31277232 sectors, multi 1: LBA48 NCQ (depth 31/32)
ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata2.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
ata2.00: configured for UDMA/133
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: disabling queued TRIM support
ata1.00: ATA-9: Samsung SSD 850 PRO 512GB, EXM02B6Q, max UDMA/133
ata1.00: 1000215216 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: disabling queued TRIM support
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA Samsung SSD 850 2B6Q PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 1000215216 512-byte logical blocks: (512 GB/476 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 1:0:0:0: Direct-Access ATA SanDisk SSD U110 001 PQ: 0 ANSI: 5
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] 31277232 512-byte logical blocks: (16.0 GB/14.9 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8
sd 0:0:0:0: [sda] Attached SCSI disk
sdb: sdb1
sd 1:0:0:0: [sdb] Attached SCSI disk
usb 1-7: new full-speed USB device number 3 using xhci_hcd
usb 1-7: No LPM exit latency info found, disabling LPM.
usb 1-7: New USB device found, idVendor=8087, idProduct=0a2a
usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
tsc: Refined TSC clocksource calibration: 2593.994 MHz
usb 1-8: new high-speed USB device number 4 using xhci_hcd
psmouse serio1: synaptics: queried max coordinates: x [..5676], y [..4758]
psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1096..]
psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xf004a3/0x943300/0x12e800, board id: 3053, fw id: 2560
psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
usb 1-8: New USB device found, idVendor=04ca, idProduct=703c
usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-8: Product: Integrated Camera
usb 1-8: Manufacturer: J89F7F2WT
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
Switched to clocksource tsc
EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: RTC configured in localtime, applying delta of 120 minutes to system time.
systemd[1]: Inserted module 'autofs4'
systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Starting Encrypted Volumes.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
systemd[1]: Created slice Root Slice.
systemd[1]: Starting Root Slice.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Starting Journal Audit Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Starting udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Starting udev Kernel Socket.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on Delayed Shutdown Socket.
systemd[1]: Starting Delayed Shutdown Socket.
systemd[1]: Reached target Remote File Systems (Pre).
systemd[1]: Starting Remote File Systems (Pre).
systemd[1]: Created slice User and Session Slice.
systemd[1]: Starting User and Session Slice.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Starting fsck to fsckd communication Socket.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting Journal Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Starting Journal Socket (/dev/log).
systemd[1]: Created slice System Slice.
systemd[1]: Starting System Slice.
systemd[1]: Reached target Slices.
systemd[1]: Starting Slices.
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Started Set Up Additional Binary Formats.
systemd[1]: Started Braille Device Support.
systemd[1]: Starting Braille Device Support...
systemd[1]: Starting Nameserver information manager...
systemd[1]: Starting Increase datagram queue length...
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Starting system-systemd\x2dfsck.slice.
systemd[1]: Starting Uncomplicated firewall...
random: nonblocking pool is initialized
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting Debug File System...
systemd[1]: Created slice system-getty.slice.
systemd[1]: Starting system-getty.slice.
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Started Read required files in advance.
systemd[1]: Starting Read required files in advance...
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Debug File System.
systemd[1]: Started Increase datagram queue length.
systemd[1]: Started Uncomplicated firewall.
systemd[1]: Started Setup Virtual Console.
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Started Nameserver information manager.
lp: driver loaded but no devices found
systemd[1]: Started udev Coldplug all Devices.
ppdev: user-space parallel port driver
systemd[1]: Started Load Kernel Modules.
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Mounted Configuration File System.
systemd[1]: Starting udev Wait for Complete Device Initialization...
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Listening on Syslog Socket.
systemd[1]: Starting Syslog Socket.
systemd[1]: Starting Journal Service...
systemd[1]: Mounted FUSE Control File System.
systemd[1]: Started Apply Kernel Variables.
systemd[1]: Started Create Static Device Nodes in /dev.
systemd[1]: Starting udev Kernel Device Manager...
systemd[1]: Started Journal Service.
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[drm] Initialized drm 1.1.0 20060810
wmi: Mapper loaded
Non-volatile memory driver v1.3
thinkpad_acpi: ThinkPad ACPI Extras v0.25
thinkpad_acpi:
thinkpad_acpi: ThinkPad BIOS JBET53WW (1.18 ), EC unknown
thinkpad_acpi: Lenovo ThinkPad T450s, model 20BXCTO1WW
cfg80211: Calling CRDA to update world regulatory domain
thinkpad_acpi: Unsupported brightness interface, please contact [email protected]
thinkpad_acpi: radio switch found; radios are enabled
thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input7
Intel(R) Wireless WiFi driver for Linux, in-tree:
Copyright(c) 2003- 2014 Intel Corporation
iwlwifi 0000:03:00.0: loaded firmware version 25.17.12.0 op_mode iwlmvm
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia: module verification failed: signature and/or required key missing - tainting kernel
i915_bpo 0000:00:02.0: enabling device (0006 -> 0007)
nvidia 0000:04:00.0: enabling device (0004 -> 0007)
[drm] Memory usable by graphics device = 4096M
checking generic (c0000000 7e9000) vs hw (c0000000 20000000)
fb: switching to inteldrmfb from EFI VGA
NVLINK: Nvlink Core is being initialized, major device number 248
Console: switching to colour dummy device 80x25
[drm] Replacing VGA console driver
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
iwlwifi 0000:03:00.0: Detected Intel(R) Dual Band Wireless AC 7265, REV=0x210
iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
ACPI Exception: AE_NOT_FOUND, Evaluating _DOD (20141107/video-1230)
ACPI: Video Device [VID1] (multi-head: no rom: yes post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:09/LNXVIDEO:01/input/input9
[drm] Initialized i915_bpo 1.6.0 20150522 for 0000:00:02.0 on minor 0
[drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:04:00.0 on minor 1
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 355.11 Wed Aug 26 16:35:41 PDT 2015
Adding 15624188k swap on /dev/sda8. Priority:-1 extents:1 across:15624188k SSFS
sound hdaudioC1D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
sound hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
sound hdaudioC1D0: hp_outs=2 (0x16/0x15/0x0/0x0/0x0)
sound hdaudioC1D0: mono: mono_out=0x0
sound hdaudioC1D0: inputs:
sound hdaudioC1D0: Dock Mic=0x19
sound hdaudioC1D0: Mic=0x1a
sound hdaudioC1D0: Internal Mic=0x12
ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
intel_rapl: Found RAPL domain dram
[drm] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
cfg80211: Calling CRDA for country: FI
cfg80211: Regulatory domain changed to country: FI
cfg80211: DFS Master region: ETSI
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s)
cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[drm] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915_bpo])
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 240x67
i915_bpo 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915_bpo 0000:00:02.0: registered panic notifier
input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14
input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15
input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input16
media: Linux media interface: v0.10
Bluetooth: Core ver 2.20
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device Integrated Camera (04ca:703c)
usbcore: registered new interface driver btusb
input: Integrated Camera as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/input/input17
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
Bluetooth: hci0: read Intel version: 370810011003110e00
Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
systemd-journald[299]: Received request to flush runtime journal from PID 1
EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
audit: type=1400 audit(1445876953.059:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=666 comm="apparmor_parser"
audit: type=1400 audit(1445876953.059:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=666 comm="apparmor_parser"
audit: type=1400 audit(1445876953.063:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=666 comm="apparmor_parser"
audit: type=1400 audit(1445876953.063:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=666 comm="apparmor_parser"
audit: type=1400 audit(1445876953.063:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=666 comm="apparmor_parser"
audit: type=1400 audit(1445876953.063:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=666 comm="apparmor_parser"
audit: type=1400 audit(1445876953.071:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=666 comm="apparmor_parser"
audit: type=1400 audit(1445876953.071:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=666 comm="apparmor_parser"
audit: type=1400 audit(1445876953.071:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=666 comm="apparmor_parser"
cgroup: new mount options do not match the existing superblock, will be ignored
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
bbswitch: version 0.7
bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.VID_
bbswitch: Found discrete VGA device 0000:04:00.0: \_SB_.PCI0.PEG_.VID_
ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
bbswitch: detected an Optimus _DSM function
bbswitch: Succesfully loaded. Discrete card 0000:04:00.0 is on
psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
vgaarb: this pci device is not a vga device
ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input6
iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
vgaarb: this pci device is not a vga device
wlan0: authenticate with 00:24:01:79:91:7c
wlan0: send auth to 00:24:01:79:91:7c (try 1/3)
wlan0: authenticated
wlan0: associate with 00:24:01:79:91:7c (try 1/3)
wlan0: RX AssocResp from 00:24:01:79:91:7c (capab=0x111 status=0 aid=1)
wlan0: associated
cfg80211: Calling CRDA for country: GB
cfg80211: Regulatory domain changed to country: GB
cfg80211: DFS Master region: ETSI
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s)
cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:24:01:79:91:7c
thinkpad_ec: thinkpad_ec_request_row: arg0 rejected: (0x01:0x00)->0x00
thinkpad_ec: thinkpad_ec_read_row: failed requesting row: (0x01:0x00)->0xfffffffb
thinkpad_ec: initial ec test failed
thinkpad_ec: thinkpad_ec_request_row: arg0 rejected: (0x01:0x00)->0x00
thinkpad_ec: thinkpad_ec_read_row: failed requesting row: (0x01:0x00)->0xfffffffb
thinkpad_ec: initial ec test failed
CPU0: Core temperature above threshold, cpu clock throttled (total events = 338)
CPU1: Core temperature above threshold, cpu clock throttled (total events = 338)
CPU1: Package temperature above threshold, cpu clock throttled (total events = 338)
CPU3: Package temperature above threshold, cpu clock throttled (total events = 338)
CPU2: Package temperature above threshold, cpu clock throttled (total events = 338)
CPU0: Package temperature above threshold, cpu clock throttled (total events = 338)
CPU0: Core temperature/speed normal
CPU1: Core temperature/speed normal
CPU1: Package temperature/speed normal
CPU0: Package temperature/speed normal
CPU3: Package temperature/speed normal
CPU2: Package temperature/speed normal
mce: [Hardware Error]: Machine check events logged
CPU1: Core temperature above threshold, cpu clock throttled (total events = 7289)
CPU0: Core temperature above threshold, cpu clock throttled (total events = 7289)
CPU0: Package temperature above threshold, cpu clock throttled (total events = 7290)
CPU2: Package temperature above threshold, cpu clock throttled (total events = 7290)
CPU3: Package temperature above threshold, cpu clock throttled (total events = 7290)
CPU1: Package temperature above threshold, cpu clock throttled (total events = 7290)
CPU1: Core temperature/speed normal
CPU0: Core temperature/speed normal
CPU0: Package temperature/speed normal
CPU1: Package temperature/speed normal
CPU3: Package temperature/speed normal
CPU2: Package temperature/speed normal
mce: [Hardware Error]: Machine check events logged
CPU1: Core temperature above threshold, cpu clock throttled (total events = 15692)
CPU0: Core temperature above threshold, cpu clock throttled (total events = 15692)
CPU0: Package temperature above threshold, cpu clock throttled (total events = 15693)
CPU3: Package temperature above threshold, cpu clock throttled (total events = 15693)
CPU2: Package temperature above threshold, cpu clock throttled (total events = 15693)
CPU1: Package temperature above threshold, cpu clock throttled (total events = 15693)
CPU1: Core temperature/speed normal
CPU0: Core temperature/speed normal
CPU0: Package temperature/speed normal
CPU1: Package temperature/speed normal
CPU2: Package temperature/speed normal
CPU3: Package temperature/speed normal
mce: [Hardware Error]: Machine check events logged
CPU1: Core temperature above threshold, cpu clock throttled (total events = 17256)
CPU0: Core temperature above threshold, cpu clock throttled (total events = 17256)
CPU0: Package temperature above threshold, cpu clock throttled (total events = 17257)
CPU3: Package temperature above threshold, cpu clock throttled (total events = 17257)
CPU2: Package temperature above threshold, cpu clock throttled (total events = 17257)
CPU1: Package temperature above threshold, cpu clock throttled (total events = 17257)
CPU1: Core temperature/speed normal
CPU2: Package temperature/speed normal
CPU3: Package temperature/speed normal
CPU0: Core temperature/speed normal
CPU0: Package temperature/speed normal
CPU1: Package temperature/speed normal
mce: [Hardware Error]: Machine check events logged